The purpose of this program is to find your way on a predefined route and to store the times of each single track point (TP).
Before you use it in this way, you have to edit a route on your mobile phone. A route exits of a some TPs. It is easy to manage. You need only two informations for each TP:
the distance from the start point and optionally a description. This description could be the name of the place and an information, where to go from this point. At the end you name your route. You can store different routes with this program.

When you starts the route, all you need is to load your predefined route and to start the watch (Key <1>).
At every reached TP you have to sycronize your watch by pressing a key (Key <0>).
The watch calculates the speed between two TPs and with this information, it will display the time and distance until you reach the next TP. This will help you finding your next TP.
This precalculation will only work fine if your speed is at the same level as of the last syncronizing.
Optionally the program can put a tone signal, when it thinks that the next TP is reached.
If you have sycronized a TP, automatically after a few seconds the next TP is displayed.
At the end of the route you have all time data and the program also calculates the average speed at each TP.

Keys

• 1 - Start/Stop watch
• 3 - Reset watch and all TP times
• 5 - Go to the last syncronized TP
• 7 - Previous TP
• 9 - Next TP
• 0 - Syncronize TP

Game keys

• Up - Display first TP after the start point
• Down - Display the last TP
• Left - Previous TP
• Right - Next TP
• Fire - Changes the content of first display line

Display

• 1. Line - Big numbers: Trip time or Distance or Real time
• 2. Line - Track name - Track length
• 3. Line - red point(TP not syncronized) or green point(syncronized) - Number of TP - Average speed 1(between this and the last TP) - Avarage speed 2(between Start and tis TP)
• 4. Line - Distance of the TP - Time to reach the TP(nosync), negative times are displayed red or Time of the TP(sync)
• 5. Line - This and the following lines are the description of the TP

Menue

• Edit TP - Here you can edit the TP data
• SaveAs - Here you can name your track. Imortant: unnamed tracks are not stored
• Load - Here you can load your saved tracks
• Settings
  • Speed - This speed is taken, if no calculated speed is avaliable. (Before the first TP is reached)
  • Font - If your mobile phone has a small display or if your descriptions are very long, the small font may help you. If you are old like me, the big font may better to read it without glasses. The first line are not affected by this setting.
  • Tone - If Tone is On, there is a short beep when the program calculates that you should reach the TP.